Create El Capitan Bootable Usb From Windows

2015-11-01 How to create El Capitan 10.11 USB installer Windows No Mac.

Create bootable usb for mac os x el capitan with transmac. A new pop up box will appear, click on the three dots, and then select the macos x el capitan.dmg file from windows. Then click on ok. Choose mac osx el capitan dmg file. Since the file is huge so it will take quite time to complete. It may take about 20 to 30 mins or more. Create El Capitan Bootable Usb From Windows Xp It does not matter whether you use macOS or Windows 10. It’s just a matter of time until your device will refuse to start, which could happen for many reasons, including (and not limited to) file corruption, hardware failure, and buggy update. Step 2: Next, we’re going to need to format the USB flash drive to get it into a state where it can accept the payload for the installation of El Capitan. Plug the USB flash drive into an available USB port and launch the ‘ Disk Utility ‘ application. Make sure that the USB flash drive is selected within the left sidebar, and then select. It might be having more functionings due to its security that’s why Windows users can’t find. 8 replies on “How to Create Bootable USB OS X El Capitan.

Kernels_10.11, Kernels_10.11.1, config.plist sample, HFSPlus.efi, NTFS.efi.

09/20/2015 New way to create Yosemite 10.10.5 USB installer here.

12/22/2014 A new version of tutorial is here – Now we only need 1 8GB USB flash drive instead of 3. But we need the download the Paragon Partition 14 free edition in addition to transmac.

For Yosemite – this boot flag must be inserted in the argument – Actually, for all OS X version, just add this boot flag

kext-dev-mode=1

Patched Kernels for Yosemite and Mavericks.

If you use Clover bootloader – to patch on the fly (no need patched kernel) for the kernel panic early reboot (most HP laptop), put the lines in the clover config.plist file – remove the “!”

KernelAndKextPatches

<!dict>

<!key>KernelPm<!/key>

<!true/>

<!/dict>

2014-07-27 A new version of tutorial is here – 28 minutes long but step by step from beginning to end.

Both Clover and Chameleon bootloaders – 34 minutes.

The Clover Boot partition idogclover14 files.

Yes, someone asked me about installing Mac OSX Mavericks 10.9.x on Windows 8 PC and Laptop without having a MAC to do all the preparation. There are tons of tutorials out there, but none are clear and proven working on newer laptops. This is the way I do it proven with real installation.

Software And Stuff NEEDED

1. Download Mavericks 10.9.2 currently in the Apps store or internet somewhere if you don’t have an account with Apple. I don’t even know if you can download the Mavericks App if you don’t have a mac even if you have the account with itunes. Anyhow, you have to figure it out to obtain either an original Mavericks App or InstallESD.dmg.

2. You need 7zip to extract all these compress files in the Mavericks App, BootDiskUtility, Transmac, Chameleon Bootloader and Chameleon_BS.

3. 3-4 usb flash drives: 2 x 2GB minimum + 1 8gb for full OS X Base System

Problems:

1. Most of tutorials out there use Transmac to create the OS X BASE installer which fails due to Windows files structrures.

2. The OS X BASE extracted from Windows doesn’t include the “Packages” folder that install important files for MAC OSX.

3. BootdiskUtility is a great program that can restore 3.hfs OS X BASE System file with correct aliases, but locks the partition at 1.2GB which is not enough space to copy “Packages” folder (4.5GB) data to.

Solutions:

BootDiskUtility

1. Use BootDiskUtility to create 2x 1.2GB USBs OS X BASE Systems – Use Transmac to copy mach_kernel to make it boot and installable without “Packages”. Use Multi Patitioning option and change the size of the boot partition to your liking, 64MB default is plenty for Chameleon, but you can change to 128-356MB if the Extra folder is big. There will be 2 partitions created, boot and the rest (depend on your USB size).

Select Part2 and click “Restore Partition” to select 3.hfs (1.2GB) OS X Base System file to restore.

Use Transmac to copy mach_kernel to the OS X Base System root.

Products ▼
For Windows
Android Manager for Win
Android Data Recovery
Phone Transfer for Win
Android Root Pro
For Mac
Android Manager for Mac
Android Data Recovery Mac
Phone Transfer for Mac
More >>>

Home > Resources > Make Bootable USB Installer from DMG

(0 comments)

DMG file is a compressed file format being used widely on Mac computer. Windows OS doesn't natively support DMG disk image files, so if you need to create a bootable USB drive from a DMG file, mostly for bootable Mac OS X or macOS installation USB, you need a special utility to help you complete the task.

There is also the possibility of converting the file into a format more suitable for Windows, which is the ISO file format for disk images. Considering the above, let's look at different ways to create a bootable drive from a DMG file on a Windows computer.

Part 1: Convert DMG to ISO and Make Bootable USB from ISO

Since Windows doesn't offer native support for DMG files, you can first convert the file to ISO. Why? A lot of easier to find an app for making a bootable USB from ISO file. The easy way to do this is to use Command Prompt. Don't be intimidated by the non-GUI environment even if you don't have any experience. If you follow the steps below, you can convert any DMG file to ISO and then create a bootable USB using the converted file.

Step 1: Open Command Prompt by typing cmd in the Run windows and hitting Enter.

Step 2: In the command interface, go to the directory in which the DMG file is saved. You can do this by using the 'cd' command followed by the file path, then pressing Enter. For example, if your disk image is in D: and Command Prompt is currently in 'C:', then type 'd:' (no quotes) and press Enter. If it is in a subfolder, type 'cd subfolder', and so on.

Step 3: Use the following command to convert the DMG file to ISO:

hdiutil convert /path/sourceimagefile.dmg -format UDTO -o /path/targetmage.iso

Step 4: Once the ISO file has been created, you can use a burning tool to create the bootable USB drive. To do that, continue with this guide.

Cons:

File damged or broken after conversion.
Failed booting from burned USB disk.
May not work with the latest DMG file.
Complex and take more time.

Part 2: Create Mac OS X Bootable USB Installer from DMG

Androidphonesoft DMG Editor is a powerful software application for Windows that will allow you to manage the non-native DMG format even if you have no experience. The interface is uncluttered, and you can even use the tool to view files, extract them, edit the DMG and even copy it to a disk. The burn function has one of the highest success rates in the industry, which makes this an ideal utility for our purpose.

Created by the talented team of developers at Androidphonesoft, DMG Editor is currently the most intuitive Windows app for handling Apple's disk image format. Each of its functions have been tested on various Windows versions, with different types of DMG files and on different PC brands. This thorough testing means no wasted DVDs or corrupted files. As long as your DMG file is in good shape, you can directly create a bootable disk.

Step 1 Install DMG Editor

Download and install DMG Editor on your Windows PC.

Step 2 Plug in USB Drive

Launch the application and click on the 'Burn' section. You will also see other modules such as Edit, Extract.

Step 3 Load DMG File

Now import the DMG file by clicking the 'Browse' button and choose the USB drive name.

Create El Capitan Bootable Usb From Windows

Step 4 Start Burning DMG to USB Drive

Click 'Burn' button at the bottom of window to start burning DMG file to USB drive. Once it get started, it displays a progress bar and you have to wait for the task to be finished. Usually, it takes 20 minutes depending on how large the file is.

In a few moments, your bootable USB flash drive will be ready for use. Since you haven't done any conversion, you can use this directly on a Mac for program installation, which you cannot do with the first method.

Part 3: Create Bootable USB from DMG in Windows Via PowerISO

Another well-known disk image utility is PowerISO. Apart from being ideal for burning ISO files, it can also burn a DMG file to USB to create a bootable drive. There are some settings that you have to keep in mind when burning with this software, but it's easy to get the hang of it once you do it a couple of times.

Bootable Usb Linux

Step 1: Download PowerISO and install it in your Windows PC. Launch the app and insert a USB drive into a free USB slot in your computer.

Step 2: You can import the DMG file directly by clicking on ‘Burn' in the toolbar or going to Tools >Burn. In the Burn window, select the DMG file from the Source File section.

El Capitan Bootable Usb Windows

Step 3:Now review the settings to select the burn speed. The default will be the maximum your hardware can handle, so you can reduce that. You can also choose to finalize the disk and verify it. Finalizing means you can't save any more files on the drive, but it primarily applies to DVDs and CDs. Choosing ‘Verify' will prompt the software to execute an additional process after the burning is done. Any errors in the bootable USB will show up at that point.

Step 4: Now click on 'Burn' and wait for the progress bar to reach 100%. Your bootable USB is now ready.

Cons:

Expensive for a single license.
Higher failure rate for bootable device.
Ugly user interface.

The Bottom Line:

The second two methods are recommended if you don't have much experience working with DMG files, but DMG Editor will appeal to novices and experts alike. The clean interface and minimal user input means a lower chance of errors while creating the bootable media.

Bootable El Capitan Installer